We have a new how-to for enabling a 3 stage + 1 sequential shift light using the Sequential Shift Light board + an additional flashing alert module (like this one) for the top end of the RPM range. It’s a different approach than what we normally have and we think it’s pretty cool! Check out a demo of…
Author: Brent Picasso
RaceCapture/Pro MK2 Quick Reference
While we’re deep into the shipping phase for the RaceCapture/Pro MK2 pre-orders, here’s a quick reference sheet to help you get the hardware set up. Download the printable PDF here: RaceCapture-Pro MK2 quick reference sheet. Watch for more how-to’s and tutorials coming up!
How to: RaceCapture Telemetry at the 25 hours of Thunderhill
Level up your race craft with real-time data Getting real-time data set up in your endurance race car will provide your crew and driver with critical, strategic information during your race: The pit crew can monitor and coach the current driver’s performance in real-time – even compare their current laps against other drivers on the team Connect a fuel level…
RaceCapture/Pro MK2 Production!
Robots building circuit boards, BECAUSE RACECAR We’re cranking out the RaceCapture/Pro MK2 production! Last week we built a large lot of telemetry module; this week we’re building panel after panel of RaceCapture/Pro MK2 units. Here’s Brent with the first official panel built! Parts Feeders Always be Feeding! All in all, Brent Scott, Kelley and Jeff were keeping…
RaceCapture/Pro MK2 – Telemetry Production
It was a busy weekend at the lab building telemetry modules! We had some big wins, but it didn’t come without some hiccups and some late night running of the machines. Flipping out First, we received the solder paste stencil mounted backwards in it’s frame. Initially we were’t sure if we’d ruin it by flipping it over in the frame,…
Updated SensorX breakout board
Super clean installs We have an updated Updated SensorX sensor breakout board! We’ve make the board more compact and change the pullup resistor spots to a friendlier through-hole design. Use the SensorX board when wiring in sensors for RaceCapture/Pro for a super clean install. Add the included pull-up resistors for your passive temp sensors, then slip…
Featured Driver: Tasha Mikko
Meet Tasha Mikko, one of our favorite customers and an early adopters of RaceCapture/Pro. Tasha competes heavily in Autocross here in the Pacific Northwest region. Here’s her story in her own words! What region / location / tracks do you currently race at? I race in autocross events, primarily with the Northwest Region of the SCCA (NWR-SCCA)…
Pre- CAN/OBD-II Lotus Elise/Exige – you CAN data!
New team member: Andrew Stiegmann
Please welcome Andrew Stiegmann as ‘ASL official’ ! Andrew’s brief words just scratches the surface of how awesome he is: I’m a software hacker and open source enthusiast/contributor. Driver of race cars, karts, motorcycles and anything with wheels . Brewer. General adventurer. While he’s not racing, brewing or championing a progressive view of women’s role in motorsports, Andrew has been focusing…
RaceCapture/Pro MK2 – launch target!
Pre-order date! Mark your calendars – Pre orders for RaceCapture/Pro MK2 start this Saturday, September 27 and shipping is targeted for early to mid November. Get on the mailing list to get the latest news on the MK2 progress and news! Calm before the storm. The last few weeks have seen a ton of activity…