Posted on 3 Comments

Reverse-engineering Ford Mustang 2011-2014 CAN Bus: Steering angle, Throttle Position, Brake Pressure, and Wheel Speeds

While Kelley and I were visiting family in Arizona, we had the opportunity to visit the garage of one of our long time customers and good friend, Chris Wynne of FTW Motorsports. Chris is fresh from a 1st place win for 2018 in NASA Super Touring Championship, and gave us a replica of his trophy…

Read more

Posted on Leave a comment

Mitsubishi Evo X RAX Patch CAN channel mappings now supported!

Great news; if you have a Mitsubishi Evolution X with the special RAX patch installed, RaceCapture/Pro can access tons of data from your ECU! 34 channels added This preset adds 34 additional channels, listed below. Refer to the RAX Patch documentation for a full description of these channels: STFT LTFTcurrent LTFTidle LTFTcruise Load RearO2 IPW…

Read more

Posted on Leave a comment

AIM SmartyCAM direct CAN integration

Faster, easier AIM SmartyCAM integration If you’re already running the RaceCapture <-> AIM integration, we’ve uploaded a starter configuration that uses the new direct CAN mapping capabilities released in the RaceCapture 1.9.0 firmware. If you’re learning about this for the first time – you can add real-time telemetry to your AIM system just by linking a single cable…

Read more

Posted on Leave a comment

Pre-order AnalogX: add 4 analog channels to your CAN enabled data system!

Free domestic / special international shipping with coupon code Pre-order today and use analogx_ship for free domestic shipping and special reduced shipping for international orders! Add 4 Analog channels to your CAN bus enabled data acquisition system AnalogX is a compact and lightweight (6 grams) 4 channel Analog to CAN I/O expander, designed to be installed in-line with your…

Read more

Posted on Leave a comment

RaceCapture app 1.11.0 released

Now With CAN Bus termination switches enabled! RaceCapture/Pro and RaceCapture/Apex both have software controlled CAN bus termination – a feature that’s been hidden away behind the software. We’ve finally added the options to the CAN Bus setup screen so you can enable / disable termination as needed – bringing relief to those of you who…

Read more

Posted on Leave a comment

New Product available: OBDII Classic Adapter

Finally available! The OBDII classic adapter as featured in our Kickstarter campaign is finally available. Many of you have been waiting seemingly forever and know exactly what it is – so get it now in our online store or from one of our many dealers! Unlock OBDII data from your 1996-2007 ECU The OBDII Classic adapter brings OBDII…

Read more

Posted on Leave a comment

Use RaceCapture as a general purpose CAN bus logger and reverse engineer your car’s data

Did you know you can use RaceCapture as a general purpose CAN bus logger to spy on data coming from your car’s CAN bus? If you have RaceCapture/Pro or RaceCapture/Apex it’s a simple copy/paste of our CAN bus logging script. It’s often the first step in mapping an unknown CAN bus system, and we cover…

Read more

Posted on Leave a comment

[video] Toyota 86 / Subaru BRZ CAN bus data – steering angle, brake pressure, oil temp and more

Luke Fleming, with help from Josh Leask of 86Drift Tuning, tapped his RaceCapture/Pro right into to the firehose of CAN bus data on his Toyota 86. Now he has steering angle, brake pressure, oil and coolant temperature, throttle position, RPM and wheel speeds – all using the direct CAN mapping capabilities of the RaceCapture system. Special thanks goes to…

Read more

Posted on Leave a comment

RaceCapture firmware 2.11.0 / RaceCapture app 1.9.0 released!

A hell of a release It’s an app and firmware release that marks a serious milestone. It almost seems the amount of thought, discussion and teeth gnashing that preceded it might have consumed more energy than it took to actually make it! Granted – all of that planning and analysis plays into building it correctly the first time, but as…

Read more

Posted on Leave a comment

Izze Racing multi-zone tire temperature support for RaceCapture/Pro

We’re excited to support Izze Racing’s hot new multi-zone tire temperature sensor!  It takes a few minutes to add all of the telemetry channels to your RaceCapture/Pro with the Lua script provided by one of our newest dealers, Race-Electronic. Check out the video, and get the integration script in our wiki!

Read more