If you’re running RaceCapture/Pro MK2 and you’re experiencing noise in the form of high RPM spikes, try the beta firmware we just made available that just might solve your problem. Where it should help If you’re using CoilX tapping directly into your ignition coil, and you’re still seeing periodic spikes due to extra noisy ignition systems If…
Extended Range temperature sensor First up is our new extended range temperature sensor. It’s compact, has a convenient 1/8″ NPT fitting and is great for both coolant and oil temperature. It’s ready to go with the included pigtail. 10 and 150 Bar pressure sensors – back in stock Our 10 and 150 bar pressure sensors are…
It doesn’t get higher quality than this – our twin conductor wiring is now milspec with some crazy specs – perfect for routing sensor connections around your hot engine. Check out the full specs in the store. SensorX breakout boards This Breakout board will distribute multiple sensor connections and let you shrink wrap it all in-line with…
Super clean installs We have an updated Updated SensorX sensor breakout board! We’ve make the board more compact and change the pullup resistor spots to a friendlier through-hole design. Use the SensorX board when wiring in sensors for RaceCapture/Pro for a super clean install. Add the included pull-up resistors for your passive temp sensors, then slip…
Note – since this post we’ve released a new , better String Potentiometer – check it out here: https://www.autosportlabs.com/new-product-string-potentiometer-sensor Unlock the secrets of your fast drivers In the mad scramble during the last minutes before our 24 hours of Lemons race we remembered wanting to install a steering angle sensor so we could get the…
We need your help! We’re getting very close to the beta release of the RaceCapture/Pro V2 firmware and app, and there will be a ton of new features to enjoy. RaceCapture/Pro users: we need your help testing the new firmware and app so we can make it the the most compelling Motorsports telemetry system possible! Got programming…
Leverage CAN and OBD2 data streams into your RaceCapture/Pro telemetry system! System Overview The CANx adapter is an interface for CAN bus networks and 2008+ OBD2 ports, complimenting the existing capabilities of RaceCapture/Pro. CAN/OBD2 data is blended together with the existing RaceCapture/Pro sensors, 10Hz GPS and accelerometer/yaw sensors, forming a comprehensive, high performance data…
The CoilX sensor module is designed to safely convert the noisy, high voltage RPM signal present on most ignition systems into a clean RPM signal for RaceCapture/Pro or other hardware devices. It’s a tiny, lightweight sensor module that can be quickly soldered with 5 wires and bundled seamlessly into your wiring harness. Available now in…