https://www.youtube.com/watch?v=RALFPNnvclw Is this the longest awaited feature of the RaceCapture app? Probably. Laptime recalculation will let you calculate laps on a session, after the fact. Why is this important? * It will help recover sessions that didn’t have laps recorded due to a mis-configuration (no track detected)* Apply laps to a session after the fact,…
Big things are coming for RaceCapture and Podium – both software and hardware. Here’s a sampling of what to expect in Q1 2020. Some of these will be delivered in the coming weeks, so brace yourselves! RaceCapture app 2.0 – all about the analysis Chances are you saw the big news about the new Podium…
We are pleased to announce a direct CAN mapping for the Mazda RX8 (Series 1). This is especially great since it bypasses the OBDII interface for fast and efficient streaming of data. Special thanks to Nick Owens for working with the Mazda community and bringing this preset to you. The preset brings in 9 valuable…
Great news: we’ve overhauled the OBDII guide, with information on how to maximize the power of RaceCapture’s OBDII system. Included in this guide is how to enable Mode 22h support, which can unlock many OEM specific channels. Get started today with the new guide in our wiki Crowdsourcing OBDII data! The power of the RaceCapture…
Our new linear temperature sensor requires no pull-up resistor and has a simple 10mV/C temperature response, great for CAN bus mapping as well as direct sensor integration. Order through our dealer network You can use the convenient preset for RaceCapture/Pro inputs – just 3 wires and you’re set. If you’re using AnalogX, use the conversion…
Update 10 Sept 2019 – 2.17.4 (RaceCapture/Pro MK3 / MK2) and 2.17.5 (RaceCapture/Apex – PodiumConnect) firmware has been released that fixes an issue with telemetry buffering when combined with virtual channels defined in Lua. We recommend updating before your next race. Download from http://podium.live/software Update 2.17.2 firmware (RaceCapture/Pro) and 2.17.3 (PodiumConnect/RaceCapture/Apex) firmware has been released…
The new RaceCapture firmware and app brings a huge set of features and fixes. Read on for what’s new – and see the easy upgrade instructions at the end of the blog post. ShiftX3 support The RaceCapture firmware brings enhanced Lua scripting support for the new ShiftX3 sequential shift light + gear indicator – and…
While Kelley and I were visiting family in Arizona, we had the opportunity to visit the garage of one of our long time customers and good friend, Chris Wynne of FTW Motorsports. Chris is fresh from a 1st place win for 2018 in NASA Super Touring Championship, and gave us a replica of his trophy…
Unified Configuration files RaceCapture configuration files (.rcp) will now store the full dashboard configuration, layout, alerts and other app preferences into the main RaceCapture configuration file saved under Setup. Correspondingly, all dashboard and app settings are restored when the file is loaded under setup. It’s a unified way to save and share your RaceCapture configuration,…
If you have been following our posts and videos on our progress towards bringing you pit-to-car alerts, you’ll know we’ve been hard at work on this big new feature for RaceCapture and Podium. Good news: it’s ready for you to beta test! But first, check out the demo by Alex of Rainbow Unicorn Racing: https://www.youtube.com/watch?v=1v-iIi1fqxw…